California has approved the most stringent, environmentally-friendly building code in the United States that will apply to new commercial buildings, hospitals, schools, shopping malls and homes. The new code, called "CAL Green"  which won a unanimous vote by the California Building Standards Commission, will take effect in January 2011.

CAL Green codes require builders to install plumbing that cuts indoor water use, divert 50 percent of construction waste from landfills to recycling, use low-pollutant materials, and install separate water meters for different uses in nonresidential buildings.

CAL Green code also requires energy system inspections by local officials to ensure that heaters, air conditioners and other mechanical equipment in nonresidential buildings are working efficiently.

Property owners can also label their facilities as CAL Green compliant, once they pass state building inspection, without the additional cost of third-party certification programs. The mandatory CAL Green provisions will be inspected and verified by local and state building departments.

However, the regulations were opposed by several private organizations that offer construction rating systems, including the U.S. Green Building Council, which said it could result in confusion for builders, local governments and the public, reports the San Francisco Chronicle.

More than 40 California cities have some form of green building ordinances.

"The code will help us meet our goals of curbing global warming and achieving 33 percent renewable energy by 2020 and promotes the development of more sustainable communities by reducing greenhouse gas emissions and improving energy efficiency in every new home, office building or public structure," stated Governor Schwarzenegger in a press release.

CAL Green from California Building Standards Commission: 

• California Building Standards Green Code
• SB1473 Building Standards Administration Special Revolving Fund
• Education & Outreach
• Green Building Standards Bulletin - BSB 08-02

In a typical home, 43% of the utility bill goes toward heating and cooling. 

Homeowners  want ready access to a variety of building methods that can make their homes more weather resistant and energy efficient.

Energy, Weatherization and Technology can incorporate energy efficiency into rebuilding technology options by educating contractors and homeowners on how best to repair or rebuild damaged homes in a more flood and wind-resistant manner.

These aren't usually cosmetic solutions.

The U.S. Department of Energy's Technical Assistance Project includes information and technical specifications that include renewable and energy-efficient technology suggestions for reconstruction.

The Oak Ridge National Laboratory has tested many high-performance building materials and provides municipalities and states with training materials and information on incorporating energy efficiency and renewable energy technologies into the rebuilding or repairing of flood- and wind-damaged homes.

Many local governments incorporates the energy efficiency and renewable energy technology materials into workshops and training materials for contractors and homeowners.

Some of the high performance technologies that are being tested and developed are found on the Department of Energy's division websites such as:

ORNL - Oak Ridge National Laboratory

DOE EERE  Energy Efficiency & Renewable Energy

Seasonal Energy Savings for Consumers  

Lawrence Livermore National Laboratory
Physical and Life Sciences

Much of Livermore's research is at the molecular level and reaches into the depths of space, but some research is also directed to the natural spaces around us.  For instance,


Through research funded by the California Energy Commission, scientists from the Laboratory, the University of California at Merced, and the National Center for Atmospheric Research found that temperatures in California from 1915 to 2000 have increased by 1.16°C (2.1°F) statewide.

The research, which appeared in the March 2008, Supplement 1 edition of Climatic Change--dedicated to California's climate--also suggests that the warming may be related to human activities.

The team used data from nine sets of observational records and from a suite of climate model simulations of natural internal climate variability to analyze trends in California-average temperatures during the periods 1950-1999 and 1915-2000.

The researchers found large increases in mean and maximum daily temperatures in late winter and early spring, as well as increases in minimum daily temperatures from January to September. These trends are inconsistent with model-based estimates of natural internal climate variability, and thus require one or more external forcing agents to be explained. The researchers suggest that the warming of Californian winters over the twentieth century is associated with human-induced changes in large-scale atmospheric circulation.

Recent climate models have not been effective in explaining California's summertime trend, where warming mainly occurs at night.

Based on their previous research, the team suggests that lack of a detectable increase in summertime maximum temperature arises from a cooling associated with large-scale irrigation, which may have counteracted warming from mounting greenhouse gases and urbanization.

If this hypothesis is verified, the acceleration of carbon dioxide emissions combined with a leveling of irrigation may result in a rapid summertime warming in the Central Valley in the future.

SO... more energy-efficient and weather-resistant homes could be a good strategy in California's Central Valley!

Sensors, monitors and controllers are becoming major "micro-players" in the green and sustainability fields because what you can measure, you can control.  There are many opportunities in basic development and manufacturing of these micro-devices, as well as assembling them into high performance equipment and solutions.

Some of the opportunities that are developing in the sensors and micro-world of data gathering, processing and control include:

Automation & Process Control Opportunities
Industrial Automation; DCS; PLC; Special Machine Tools; Fluid Power - hydraulic and pneumatic power; Motors & Drives - Industrial Motors, Electric Drives, Mechanical Power; Process Control - Compressors; and Vacuum Pumps

Sensors Opportunities
Sensors, Industrial Gas Sensors, Infrared Sensors, AVV Sensors, Flow Sensors, Level Sensors, Temperature Sensors, Pressure Sensors, and Magnetic Sensors

Electronics Opportunities
Electronics; AutoID - Tracking Technologies, POS/ePayment Systems, Biometrics/Security Systems, Electronic Component, and Surface Mount Technology (SMT)

Semiconductors Opportunities
Semiconductors, Microcontrollers, Power Transistors, UWB and Zigbee Chipsets, Radio Frequency (RF) Semiconductors, and VLSI Design Services Markets